Large gold sunburst wall mirror decorative producer - Bulk Supply and Specification Guide
When a brand extends an existing range, a large sunburst mirror must match the line’s gold tone and visual scale while staying practical to hang and ship. A lighter steel-ray construction can lower freight and handling costs, while thinner or less protected components may increase bent-ray complaints and returns. Set the mirror diameter, overall projection, finish reference and approved weight range before comparing unit prices.
Design Constraints Behind the Specification
A wide ray layout puts leverage on the central frame and its wall fixing points. If the design has long, narrow rays, specify their attachment and support arrangement against the approved drawing; a small unit-price saving is rarely worthwhile if rays arrive visibly out of plane or the mirror shifts during installation. Confirm wall-hanging hardware for the expected finished weight and intended mounting orientation.
Overall Diameter
Common bulk configurations fall around 50–90 cm; confirm whether the stated size includes the tips of the rays.
Face and Projection
The mirror face and projecting rays affect both visual balance and carton depth. Approve the complete side profile, not only a front-view image.
Gold Appearance
Metallic powder coating and plated finishes differ in sheen, touch-up options and cost. Match production to a signed finish sample.
Finished Weight
Weight varies with diameter, ray count, frame gauge and backing. Set a target range before freight costing and hanger selection.
How to Choose Before Requesting a Quote
During a private-label launch with a fixed ship date, lock the face diameter, ray profile, finish sample and hanger position before asking for a firm production price. A late change to ray length can require a new forming fixture or revised assembly jig; that adds setup time and can disrupt the approved sample match. Quote the same drawing revision and finish reference with every supplier so the comparison reflects the delivered product, not an incomplete specification.
Lower-Cost Powder-Coated Steel
This route suits repeat programs that need a controlled gold appearance at a competitive landed cost. The finish can show chips at exposed edges after rough handling, so ray tips and joints need clear visual acceptance criteria.
Higher-Cost Plated Finish
Plating can provide a brighter, more reflective gold effect, but process and surface preparation add cost. Choose it when the finish is a defining feature of the range, then approve the actual production sample under consistent lighting.
| Build or Customization Point | Typical Bulk Reference | Buyer Decision |
|---|---|---|
| Overall diameter | Often 50–90 cm; larger formats are possible by design. | Define tip-to-tip measurement and face diameter separately. |
| Finished weight | Commonly about 3.5–9 kg, depending on size and frame construction. | Agree a target range for freight planning and hanging hardware. |
| Mirror and frame materials | Typically 3–4 mm mirror glass with a steel or iron ray frame; backing may be metal or engineered board. | Confirm the complete construction on the sample and drawing. |
| Finish and private label | Gold shade, sheen, label position and carton marks can be specified. | Provide approved artwork and a physical finish reference before production. |
Usage Scenarios and Buyer Segments
Moving from sample orders to container loads changes the cost of small inconsistencies. A shade shift, uneven ray spacing or loose mirror backing can affect an entire retail batch rather than a few trial units. The right specification depends on where the mirror will be displayed and how buyers handle installation.
- Home décor brands extending a coordinated wall collection need the same gold tone and face-to-ray proportions across reorder batches.
- Furniture and décor wholesalers serving independent retailers often prioritize a carton-friendly profile and a clear installation method to reduce transit and setup complaints.
- Hospitality procurement teams selecting mirrors for guest rooms or reception areas need a consistent visual finish across multiple rooms and dependable wall-hanging points.
- Online private-label sellers benefit from repeatable dimensions and weight because product photography, listing measurements and return-cost estimates rely on a stable specification.
Requirements by Buyer Segment
Private-Label Buyers
A private-label buyer needs the sample to act as a production reference, not only as a visual concept. Approve the gold finish, ray count and spacing, mirror diameter, hanger placement, label artwork and acceptable dimensional variation in one controlled specification. If these details remain open, low initial pricing may be offset by rework, relabeling or customer claims over appearance.
Wholesale Buyers
Wholesale buyers generally benefit from a limited set of fixed sizes and finishes that can be reordered without new tooling. A broader option list may attract more inquiries, but each finish and dimension can split order volume and complicate stock planning. Keep the core range narrow unless sales data supports additional variants.
Capacity, Tooling and Scheduling
Production timing depends on whether the ray profile and central frame use existing forming and assembly fixtures. A new silhouette, revised ray length or different hanging arrangement can add drawing review, sample approval and tooling time before the bulk schedule starts. For repeat orders, retain the approved drawing revision and finish sample; that reduces avoidable setup changes and helps keep batch appearance consistent.
Inspection criteria should be agreed against the approved sample and drawing rather than left to a general visual description. Check points can be recorded by lot so a buyer can compare dimensional drift, finish variation and assembly issues across repeat shipments.
| Inspection Point | Factory Check | Acceptance Basis |
|---|---|---|
| Overall dimensions and weight | Measure tip-to-tip diameter and weigh finished units at agreed sampling points. | Approved drawing and agreed weight range. |
| Ray alignment and assembly | Compare spacing and projection to a front and side reference; check joints and hanger attachment. | Signed sample and agreed appearance limits. |
| Gold finish consistency | Review representative surfaces under consistent lighting for shade, sheen, chips and exposed edges. | Approved physical finish sample. |
| Mirror and backing fit | Check glass condition, seating and backing attachment during assembly review. | Approved construction sample with no visible damage or loose fit. |
Share the target order quantity, launch date, chosen diameter and finish reference before scheduling. A tooling review can identify whether the requested design fits existing fixtures or needs a new setup, giving buyers a clearer view of sample timing and the cost of each variation.
Request a Tooling Review
Send your drawing or reference image, planned order volume, target ship date and finish preference. We can review the ray construction, size range and fixture requirements before quotation.
Discuss your mirror specification
